How to make a mask for your sniper’s hide?

The best sniper’s mask can be made out of something really basic, like an old pair of jeans.

There are a number of basic masks that you can make, but you’ll need a pair of scissors and some duct tape.

For a complete set of mask components, you’ll also need a sheet of mask tape, duct tape, a ruler, a drill bit and some screws.

There’s also some glue for this process.

Here’s how you can do this.


Cut out the mask template.

This template can be cut from a cheap plastic bag, but it’s worth it.

This is the first step in making your mask.

You’ll want to be careful to not cut your template, because this mask will be more fragile than your normal mask.


Cut the tape.

Cut a piece of duct tape to about 1.5m long and 1m wide.

You can use any length of tape, but make sure that it’s not too long, so you don’t break it. 3.

Cut your mask template from a piece you made.

For this tutorial, I used a sheet for this step, which I cut out on my workbench.

The mask template will need to be taped to the sheet you cut.


Drill a hole.

If you’re making this mask for someone else, then you need to drill a hole in the sheet.

If it’s too small, you won’t be able to drill the hole, so make sure it’s bigger than your sheet.


Cut tape.

You may have to use duct tape as a guide.

I used some old duct tape that I had lying around.

If so, tape the tape to the mask and then use a ruler to measure the length of the tape, and tape the length down.

The ruler should measure around 0.25cm, which is plenty long for this mask.


Cut mask.

The cut-out sheet will be your mask sheet.

You’re going to need to tape the mask sheet to the template.

If the template isn’t big enough, you may need to cut it.

Make sure the mask is taped tightly, otherwise the mask might crack.


Tape the mask.

Tape your mask tape to your sheet, so it’s securely taped to your template.


Drill the hole.

The hole in your sheet should be a small enough that you don.t have to drill it, so the mask should fit snugly in there.

If not, you can just make the hole larger.


Cut strips of duct.

These will be the mask strips.

You want to use strips of tape to hold your mask strips to your mask templates, so be sure you have a strip of tape on the template when you cut them.


Tape mask strips together.

If your mask has a cut-outs on them, then tape the strips together to make the mask sheets.


Drill holes.

Use a drill press to drill holes into your mask sheets to hold the mask pieces together.


Tape strips together again.

You should be done with the mask parts.

You might need to add mask strips as you go to make your mask more robust.

If that’s the case, then just make sure the sheet is securely taped up to your templates.


Make mask sheets, then glue them together.

You’ve just made your mask, but now it’s time to make mask sheets for the other parts of the mask: your face, your eyes, and your mouth.

There aren’t a lot of mask sheets out there, so if you want to make them yourself, you will need some duct or glue.

1 – The mask sheets are the same size as the mask templates.

2 – Cut the mask tape.

I’m using a piece that’s about 1cm wide and 1cm long.

It’s also 1cm thick, so I used the tape for the mask cut-away.

3 – Cut duct tape for your mask tapes.

The tape will be 2.5cm long, and will have to be cut to a length that will fit your template mask.

4 – Drill holes for mask templates for the face, eyes, mouth, and mask.

5 – Tape mask templates together.

6 – Tape the duct tape strips together, so that they’re tightly bound.

7 – Tape masks together.

8 – Cut mask sheets together.

9 – Cut your strips of mask strip for your masks.

If all of this sounds complicated, then that’s ok.

It’ll be pretty easy to figure out once you have the parts of a mask sheet assembled.

You could also make your masks for someone who’s a bit less experienced, but they’ll have to do the actual mask construction themselves.

Here are a few other things you’ll want: A mask sheet for your eyes You can make your eyes mask with a sheet that’s 1cm in width, but the eyes are about 1-2cm across, so a sheet with 1